page_banner

Products

QDT5165ZYSE Compression Garbage Truck

Short Description:

● Curved side gate structural box body ( high – strength plate ) and frame -type structural box body are optional ;

● All parts that are subject to friction for being in contact with garbage such as rear loader plate are of high – strength wear plate , which is able to withstand the repeated shock and friction due to compression of garbage ;

● All key components such as guide rails of compression mechanism are of machined parts ; the sliding blocks are of high – strength nylon ; all parts are precisely fit to ensure smooth operation ;


Product Detail

Product Tags

Features

● Curved side gate structural box body ( high - strength plate ) and frame -type structural box body are optional ;

● All parts that are subject to friction for being in contact with garbage such as rear loader plate are of high - strength wear plate , which is able to withstand the repeated shock and friction due to compression of garbage ;

● All key components such as guide rails of compression mechanism are of machined parts ; the sliding blocks are of high - strength nylon ; all parts are precisely fit to ensure smooth operation ;

● Proximity switches, which are capable of non- contact sensor Switching , are employed to control the action of compression mechanism ; it is not only reliable and stable but also is obviously energy - saving ;

● The hydraulic system is of dual - pump dual - loop system and is enjoying a prolonged service life of hydraulic system and significantly reduced energy consumption ;

● Imported multiple valves are employed to make bi-directional compression possible ; it is featured by reliable performance and high garbage compression density ;

● Operating system can be electrically and manually controlled ; it is convenient to operate with manual operation as an auxiliary option ;

● The compression mechanism is able to compress the garbage in both single - cycle and automatic continuous cycle modes and is able to reverse in case of jamming ;

● The rear loader is configured with lifting, discharging and automatic cleaning functions and it can be more conveniently used ;

● Electrical-control automatic acceleration & constant speed device can not only meet requirements for loading efficiency but also can efficiently limit the oil consumption and reduce the noise level;

● Hydraulic automatic locking mechanism is employed at the joint between front box body and rear loader ; U sealing rubber strip that ensures reliable sealing is used to effectively avoid the leaking of sewage during loading and transportation of garbage .

3.1

Major Technical Parameters

Model QDT5165ZYSE
Chassis model DFL1160BXB
Engine type ISDe185 40( optional as per requirement )
Rated power ( kw ) 136
Laden mass rating ( kg ) 6355,6055
Kerb mass ( kg ) 9450,9750
Gross mass ( kg ) 16000
Maximum speed ( km / h ) 90
Tyre size 10.00-20( optional as per requirement )
Overall dimensions ( L x W x H )( mm ) 7560,7860×2500×3100
Wheelbase ( mm ) 3800
Front overhang / rear overhang ( mm ) 1430/2330
Approach angle / departure angle (°) 20/13
Compartment effective volume (m3) 12
Loader volume (m3) 1.9
Hydraulic system pressure rating ( Mpa ) 19
Ground clearance of lower edge of filer port ( mm ) Appr .1130
Time for loader to complete one work cycle ( s ) ≤25
Time for push plate to complete discharging garbage ( s ) ≤40
Sump tank volume ( L ) ≥300
Manipulator turn - over mass ( kg ) ≥600
Garbage compression density ( kg /m3) ≥800

  • Sending Enquiries
    For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
    inquiry now