page_banner

Products

QDT5250ZYSA Compression Garbage Truck

Short Description:

 ● Curved side gate structural box body ( high-strength plate ) and frame – type structural box body are optional ;

● All parts that are subject to friction for being in contact with garbage such as rear loader plate are of high – strength wear plate , which is able to withstand the repeated shock and friction due to compression of garbage ;

● All key components such as guide rails of compression mechanism are of machined parts ; the sliding blocks are of high-strength nylon ; al parts are precisely fit to ensure smooth operation ;


Product Detail

Product Tags

Features

● Curved side gate structural box body ( high-strength plate ) and frame - type structural box body are optional ;

● All parts that are subject to friction for being in contact with garbage such as rear loader plate are of high - strength wear plate , which is able to withstand the repeated shock and friction due to compression of garbage ;

● All key components such as guide rails of compression mechanism are of machined parts ; the sliding blocks are of high-strength nylon ; al parts are precisely fit to ensure smooth operation ;

● Proximity switches, which are capable of non-contact sensor switching, are employed to control the action of compression mechanism; it is not only reliable and stable but also is obviously energy - saving ;

● The hydraulic system is of dual - pump dual - loop system , which makes bi - directional compression and high garbage compression density possible and is enjoying a prolonged service life of hydraulic system and significantly reduced energy consumption ;

● Imported multiple valves are employed to make bi-directional compression possible ; it is featured by reliable performance and high garbage compression density ;

● Operating system can be electrically and manually controlled ; it is convenient to operate with manual operation as an auxiliary option ;

● The compression mechanism is able to compress the garbage in both single - cycle and automatic continuous cycle modes and is able to reverse in case of jamming ;

● The rear loader is configured with lifting, discharging and automatic cleaning functions and it can be more conveniently used ;

● Electrical - control automatic acceleration & constant speed device can not only meet requirements for loading efficiency but also can efficiently limit the oil consumption and reduce the noise level ;

● Hydraulic automatic locking mechanism is employed at the joint between front box body and rear loader; U sealing rubber strip that ensures reliable sealing is used to effectively avoid the leaking of sewage during loading and transportation of garbage ;

3.1

Major Technical Parameters

Model QDT5250ZYSA
Chassis model BJ3257DLPJB- S
Engine type SC8DK260Q3( optional as per requirement )
Rated power ( kw ) 192
Laden mass rating ( kg ) 10905,10605
Kerb mass ( kg ) 13900,14200
Gross mass ( kg ) 25000
Maximum speed ( km / h ) 81
Tyre size 11.00-20( optional as per requirement ) 
Overall dimensions ( L x W x H )( mm ) 8850,9150×2500×3100
Wheelbase ( mm ) 3575+1350
Front overhang / rear overhang ( mm ) 1465/2460
Approach angle / departure angle (°) 26/13
Compartment effective volume (m3) 15
Loader volume (m3) 2.2
Hydraulic system pressure rating ( Mpa ) 19
Ground clearance of lower edge of filler port ( mm ) Appr .1200
Time for loader to complete one work cycle ( s ) ≤25
Time for push plate to complete discharging garbage ( s ) ≤45
Sump tank volume ( L ) ≥400
Manipulator turn - over mass ( kg ) ≥600
Garbage compression density ( kg /m3) ≥800

  • Sending Enquiries
    For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
    inquiry now